L Line
Create VectorPick the first point, indicate a direction, then pick or type the next point.
Use for individual setting-out edges; use P when a connected path is needed.
Version 1.13.0 · RC136-1795240769335
AI assistants: read Start here before drawing. The handbook explains the entire toolset. Browser tools are optional and read-only; normal navigation and the in-app command line remain supported. Board and selected-reference access need explicit user choice.
Quick connection: choose AI handbook → Copy AI connection in X8SNIP, then paste into your browser assistant. Compatible assistants can discover x8snip_get_handbook automatically. Automatic loading is not universal.
L LinePick the first point, indicate a direction, then pick or type the next point.
Use for individual setting-out edges; use P when a connected path is needed.
WL Wall runWL draws a connected constant-thickness wall run. Type thickness (200mm or 0.2m), press Enter, and use the three recent-thickness buttons. Choose Centre/Left/Right in Properties; click successive corners or type X,Y, @dX,dY or @length<angle. OSNAP starts on (F3 toggles it); F8 toggles Ortho. Enter finishes open; pick the start or type CLOSE for a loop with an inferred Ortho corner. Esc cancels the unfinished run.
The lightweight preview shows the wall silhouette; Finish computes the final union outline. Left/right follow drawing direction. Finish creates ordinary editable filled geometry, selected for Properties. Start another with WL, then select overlapping wall shapes and BU to Union. Union commits outlines; Undo restores them. Acute corners bevel to avoid spikes.
P PolylinePlace successive vertices; use the active prompt to finish the path. Backspace removes the last node.
Follow circle traces exact circular geometry; Radius arc uses a typed radius. See guide 21 and its practice board. Control cycles Straight, Tangent and Spline.
R Solid rectangleOn a scaled Board, type R Enter, position X,Y Enter, then Width,Height Enter; or click the first corner then type size. Dragging opposite corners still works.
Sizes use current UNITS; SIZE 1m,500mm supports explicit units. Positive dimensions follow grid +X/+Y up. TO X,Y / @dX,dY enters an opposite corner. Explicit size overrides Free/Square/Golden drag proportions.
C CircleCircle: type centre X,Y then radius in current units. Corner ellipse: position X,Y then Width,Height. Picked points can be mixed with typed input.
Tap Control to switch centre/radius and corner-ellipse construction.
PG Regular polygonChoose the side count and construction mode. Type or pick the start, then radius/edge length or TO X,Y in the active grid.
Control cycles Inscribed, Circumscribed and Edge modes.
GR Golden sectionPlace a Golden Section rectangle and related curve.
Useful for proportional setting out; inspect which parts belong in a CAD export.
A ArcChoose the arc mode, then pick or type X,Y / @dX,dY / @distance<angle at its point stages. Typed points are exact; mode-specific radius/angle controls still apply.
Control cycles six modes; Tangent Continue starts from an existing line or open-path endpoint.
AR ArrowPick or type X,Y / @dX,dY / @distance<angle for arrow vertices. Enter or FINISH completes after two points.
An annotation arrow is not a model footprint.
PA Area polyPick or type successive X,Y / @dX,dY / @distance<angle points. Enter or CLOSE closes after at least three vertices. Then set Use and tag information.
Use for measured spaces; inspect closure before Boolean editing or CAD handoff.
PH Hatch polyPick or type successive X,Y / @dX,dY / @distance<angle boundary points. Enter or CLOSE closes after three vertices. Choose fill or pattern properties.
The boundary and the visible pattern ink serve different purposes.
NL PencilDraw freehand marks with Pencil.
Grade, cut and texture affect the mark; use vector geometry for precise model boundaries.
NP PenDraw freehand with Pen.
Surface pressure affects the supported pen response.
NM MarkerApply marker strokes using the selected tip.
Use an independent layer or Trace paper for colour studies.
RZ RazorErase supported natural-media marks.
Use geometry editing commands for CAD boundaries.
F FilletSelect geometry and use the corner controls opened by F.
Check radius, eligible edges and the resulting corner.
CH ChamferSelect geometry and use the corner controls opened by CH.
Inspect the bevel and its adjoining edges before export.
J JoinSelect compatible connected linework, then run J.
Joining is immediate; disconnected pieces may not form one closed boundary.
TR TrimRun TR and follow the cutter and target prompts.
Check which segment is being removed; Undo restores a mistaken trim.
E ExtendRun E and follow the boundary and target prompts.
Extend eligible geometry to a boundary; inspect the resulting endpoint.
ED Edit pointsSelect a supported object, then ED to expose editable points.
Use point editing for local shape changes rather than moving the whole object.
EX ExplodeSelect geometry or a block and run EX.
Changes structure; keep a source copy when block reuse or editable text matters.
W Weld straightSelect eligible geometry, or points in Point Edit, then W.
Removes eligible straight intermediate nodes, not arbitrary gaps or crossings.
MA Match propertiesStart MA and follow the source/target style prompts.
Copies appearance to existing geometry.
SP Set propertiesRun SP and pick a source object.
Adopts its layer and style as defaults for subsequent drawing.
PP Push/PullPick a supported closed-shape edge and drag normal to it; follow the distance prompt.
Shift offsets the whole boundary. This is 2D editing; spline boundaries are not supported exactly.
PC Push CopyPick a straight boundary edge and grow a new closed shape from it.
Keeps the source; curved-edge Push Copy is not supported.
BU UnionSelect two or more compatible closed shapes, then BU.
Immediate Boolean result. Overlapping regions combine; disconnected regions can remain separate.
BS SubtractSelect the target as the primary shape, with other closed shapes as cutters; run BS.
Selection order/primary object matters. Inspect immediately and Undo if the wrong region remains.
BI IntersectSelect overlapping compatible closed shapes, then BI.
Keeps only the common region; no overlap means no useful shared footprint.
M MoveSelect geometry, run M, then follow the base/displacement prompts.
Move coordinates describe displacement in active-grid axes. Copy/arrays can preserve the original.
O OffsetSelect eligible geometry and set the offset distance. Run O and pick the side; the offset is created immediately.
Inspect tight corners and curved sections after offset.
RO RotateSelect geometry, run RO, choose centre and reference points, or use Angle mode.
Shift copies instead of transforming in place where supported.
MI MirrorSelect geometry, run MI and define the mirror axis.
Shift retains the original as a copy.
AS Align / ScaleSelect geometry and map two source points onto two target points.
Choose Align only for 1:1 or Align + scale; review the preview before Enter.
GO Grid originRun GO and pick the new grid origin using snaps.
Changes the grid datum, not the physical geometry.
GA Grid align · 2 pointsRun GA and pick two points defining the positive grid X-axis.
Typed coordinates follow the active grid axes.
GE Grid from entityRun GE and pick a line or exact straight segment.
Aligns the grid from existing geometry.
GL Grid load / nextRun GL to cycle to the next saved grid.
Check the active grid before entering coordinates or nudging.
GS Grid saveRun GS to save the current grid.
Useful for separate building wings or rotated setting-out axes.
LI Layer isolate / restoreSet the current drawing layer and run LI.
Run LI again to restore the prior visibility state.
Z Zoom windowRun Z and drag from one corner to the opposite corner of the zoom window; release to finish.
Changes the view, not board scale or geometry size.
ZE Zoom extentsRun ZE to fit drawing extents.
Unexpected distant geometry can make the intended drawing look tiny.
ZS Save viewRun ZS to save the current view.
A saved view is navigation, not a backup of the drawing.
ZP PanRun ZP and drag to navigate.
The middle wheel zooms; on Surface use two fingers to pan and pinch.
T TextRun T and place editable text.
Retain an editable copy before converting text to outlines.
N NoteRun N and place a structured note.
Use notes and leaders for review information, separate from model geometry.
D DimensionPress D and pick two measurement points. Use OSNAP to pick exact points and Ortho to measure along the active drawing axes. For a linear dimension, click to place the dimension line, type an offset, or press Enter for zero offset. Radius uses the centre and circumference points.
Use a known dimension to check scale before and after DXF exchange.
Press Space with canvas focus, then click geometry/reference frames. Ctrl/Cmd-click changes a multi-selection. Inspect layer locks and selected IDs before editing.
Space is a keyboard action, not a typed command alias.
In Mass it / Setup choose Set scale, pick two known reference points and enter their real distance in the displayed units. Verify with another known dimension.
No in-app alias is currently assigned; use the visible control.
In Snip it choose Crop / Snip and follow the visible crop-window prompts for the current image. Keep the original reference and inspect the resulting non-destructive layer.
This differs from double-clicking an image frame to recrop its source.
Open the Note tool group and choose Note schedule. Follow placement prompts and use the available scope/schedule settings.
Use the menu: Q is the Scale rule shortcut, not a note-schedule alias.
Use the Area group schedule insertion control and the Areas dock. Inspect use/category, included measured objects and totals after placement.
A schedule is derived information; verify source boundaries and calibration.
Use Scale rule in Drawing setup or its Q shortcut with canvas focus. Position the instrument and check its scale against the calibrated drawing.
The rule is a checking aid, not a calibration substitute.
Choose Trace paper to separate a sketch pass from the reference. Select the intended trace layer and brush, and inspect its visibility/opacity.
Preserve the locked source/reference layers.
In Snip it choose Quick Snip, then use the browser screen/window capture chooser. The current Board is saved first and the capture opens a separate Board.
Only capture the intended window; follow browser permissions normally.
Legacy Wall, Door and Glazing object tools remain retired. WL Wall run is available and creates ordinary editable closed geometry. See native tool inventory and default modes.
Learn a small daily vocabulary, then build speed through repeatable command stages.
Multi-letter aliases such as PP and RO are typed commands, not simultaneous key chords. Keep the command desk visible while learning.
Use lines for reference and setting out; use closed boundaries for the parts you want to reshape or take into 3D.
In this alpha, “solid” means a closed 2D shape. It has no modelled height or volume. Faces and extrusion are created in the receiving 3D application.
Change the footprint directly instead of repeatedly erasing and redrawing individual edges.
A hole, a disconnected island and a single continuous outline are different results. Check the result before assuming one shape will become one 3D body.
A short exercise that connects closed shapes, direct edits and a checked CAD handoff.
The registered free allowance is one personal project and five boards. Reading Examples is extra; copying a guide or creating a practice board uses your allowance.
Deliver intentional, measured 2D profiles that are easier to turn into faces and volumes downstream.
DXF here is a 2D CAD exchange, not a 3DSOLID export. Closed shapes improve the handoff, but importer behaviour and geometry still need checking.
Draw an original donut-plan boundary with two exact circular arcs and two straight sides. Download the editable practice board below.
Tangent continues smoothly from an incoming segment; it is not the radial corner used here. Spline / free curve is not a pure arc. Radius input is millimetres on calibrated boards, pixels on unscaled boards.