{
  "version": "1.13.0",
  "build": {
    "version": "96.3.110",
    "candidate": "RC136",
    "buildId": "RC136-1795240769335",
    "builtAt": "2026-11-21T05:59:29.335Z"
  },
  "interface": "in-app command line, not an OS executable",
  "commands": [
    {
      "group": "Create Vector",
      "alias": "L",
      "name": "Line",
      "steps": "Pick the first point, indicate a direction, then pick or type the next point.",
      "tip": "Use for individual setting-out edges; use P when a connected path is needed."
    },
    {
      "group": "Create Vector",
      "alias": "WL",
      "name": "Wall run",
      "steps": "WL draws a connected constant-thickness wall run. Type thickness (200mm or 0.2m), press Enter, and use the three recent-thickness buttons. Choose Centre/Left/Right in Properties; click successive corners or type X,Y, @dX,dY or @length<angle. OSNAP starts on (F3 toggles it); F8 toggles Ortho. Enter finishes open; pick the start or type CLOSE for a loop with an inferred Ortho corner. Esc cancels the unfinished run.",
      "tip": "The lightweight preview shows the wall silhouette; Finish computes the final union outline. Left/right follow drawing direction. Finish creates ordinary editable filled geometry, selected for Properties. Start another with WL, then select overlapping wall shapes and BU to Union. Union commits outlines; Undo restores them. Acute corners bevel to avoid spikes."
    },
    {
      "group": "Create Vector",
      "alias": "P",
      "name": "Polyline",
      "steps": "Place successive vertices; use the active prompt to finish the path. Backspace removes the last node.",
      "tip": "Follow circle traces exact circular geometry; Radius arc uses a typed radius. See guide 21 and its practice board. Control cycles Straight, Tangent and Spline."
    },
    {
      "group": "Create Vector",
      "alias": "R",
      "name": "Solid rectangle",
      "steps": "On a scaled Board, type R Enter, position X,Y Enter, then Width,Height Enter; or click the first corner then type size. Dragging opposite corners still works.",
      "tip": "Sizes use current UNITS; SIZE 1m,500mm supports explicit units. Positive dimensions follow grid +X/+Y up. TO X,Y / @dX,dY enters an opposite corner. Explicit size overrides Free/Square/Golden drag proportions."
    },
    {
      "group": "Create Vector",
      "alias": "C",
      "name": "Circle",
      "steps": "Circle: type centre X,Y then radius in current units. Corner ellipse: position X,Y then Width,Height. Picked points can be mixed with typed input.",
      "tip": "Tap Control to switch centre/radius and corner-ellipse construction."
    },
    {
      "group": "Create Vector",
      "alias": "PG",
      "name": "Regular polygon",
      "steps": "Choose the side count and construction mode. Type or pick the start, then radius/edge length or TO X,Y in the active grid.",
      "tip": "Control cycles Inscribed, Circumscribed and Edge modes."
    },
    {
      "group": "Create Vector",
      "alias": "GR",
      "name": "Golden section",
      "steps": "Place a Golden Section rectangle and related curve.",
      "tip": "Useful for proportional setting out; inspect which parts belong in a CAD export."
    },
    {
      "group": "Create Vector",
      "alias": "A",
      "name": "Arc",
      "steps": "Choose the arc mode, then pick or type X,Y / @dX,dY / @distance<angle at its point stages. Typed points are exact; mode-specific radius/angle controls still apply.",
      "tip": "Control cycles six modes; Tangent Continue starts from an existing line or open-path endpoint."
    },
    {
      "group": "Create Vector",
      "alias": "AR",
      "name": "Arrow",
      "steps": "Pick or type X,Y / @dX,dY / @distance<angle for arrow vertices. Enter or FINISH completes after two points.",
      "tip": "An annotation arrow is not a model footprint."
    },
    {
      "group": "Create Vector",
      "alias": "PA",
      "name": "Area poly",
      "steps": "Pick or type successive X,Y / @dX,dY / @distance<angle points. Enter or CLOSE closes after at least three vertices. Then set Use and tag information.",
      "tip": "Use for measured spaces; inspect closure before Boolean editing or CAD handoff."
    },
    {
      "group": "Create Vector",
      "alias": "PH",
      "name": "Hatch poly",
      "steps": "Pick or type successive X,Y / @dX,dY / @distance<angle boundary points. Enter or CLOSE closes after three vertices. Choose fill or pattern properties.",
      "tip": "The boundary and the visible pattern ink serve different purposes."
    },
    {
      "group": "Natural Media",
      "alias": "NL",
      "name": "Pencil",
      "steps": "Draw freehand marks with Pencil.",
      "tip": "Grade, cut and texture affect the mark; use vector geometry for precise model boundaries."
    },
    {
      "group": "Natural Media",
      "alias": "NP",
      "name": "Pen",
      "steps": "Draw freehand with Pen.",
      "tip": "Surface pressure affects the supported pen response."
    },
    {
      "group": "Natural Media",
      "alias": "NM",
      "name": "Marker",
      "steps": "Apply marker strokes using the selected tip.",
      "tip": "Use an independent layer or Trace paper for colour studies."
    },
    {
      "group": "Natural Media",
      "alias": "RZ",
      "name": "Razor",
      "steps": "Erase supported natural-media marks.",
      "tip": "Use geometry editing commands for CAD boundaries."
    },
    {
      "group": "Edit",
      "alias": "F",
      "name": "Fillet",
      "steps": "Select geometry and use the corner controls opened by F.",
      "tip": "Check radius, eligible edges and the resulting corner."
    },
    {
      "group": "Edit",
      "alias": "CH",
      "name": "Chamfer",
      "steps": "Select geometry and use the corner controls opened by CH.",
      "tip": "Inspect the bevel and its adjoining edges before export."
    },
    {
      "group": "Edit",
      "alias": "J",
      "name": "Join",
      "steps": "Select compatible connected linework, then run J.",
      "tip": "Joining is immediate; disconnected pieces may not form one closed boundary."
    },
    {
      "group": "Edit",
      "alias": "TR",
      "name": "Trim",
      "steps": "Run TR and follow the cutter and target prompts.",
      "tip": "Check which segment is being removed; Undo restores a mistaken trim."
    },
    {
      "group": "Edit",
      "alias": "E",
      "name": "Extend",
      "steps": "Run E and follow the boundary and target prompts.",
      "tip": "Extend eligible geometry to a boundary; inspect the resulting endpoint."
    },
    {
      "group": "Edit",
      "alias": "ED",
      "name": "Edit points",
      "steps": "Select a supported object, then ED to expose editable points.",
      "tip": "Use point editing for local shape changes rather than moving the whole object."
    },
    {
      "group": "Edit",
      "alias": "EX",
      "name": "Explode",
      "steps": "Select geometry or a block and run EX.",
      "tip": "Changes structure; keep a source copy when block reuse or editable text matters."
    },
    {
      "group": "Edit",
      "alias": "W",
      "name": "Weld straight",
      "steps": "Select eligible geometry, or points in Point Edit, then W.",
      "tip": "Removes eligible straight intermediate nodes, not arbitrary gaps or crossings."
    },
    {
      "group": "Edit",
      "alias": "MA",
      "name": "Match properties",
      "steps": "Start MA and follow the source/target style prompts.",
      "tip": "Copies appearance to existing geometry."
    },
    {
      "group": "Edit",
      "alias": "SP",
      "name": "Set properties",
      "steps": "Run SP and pick a source object.",
      "tip": "Adopts its layer and style as defaults for subsequent drawing."
    },
    {
      "group": "Boolean",
      "alias": "PP",
      "name": "Push/Pull",
      "steps": "Pick a supported closed-shape edge and drag normal to it; follow the distance prompt.",
      "tip": "Shift offsets the whole boundary. This is 2D editing; spline boundaries are not supported exactly."
    },
    {
      "group": "Boolean",
      "alias": "PC",
      "name": "Push Copy",
      "steps": "Pick a straight boundary edge and grow a new closed shape from it.",
      "tip": "Keeps the source; curved-edge Push Copy is not supported."
    },
    {
      "group": "Boolean",
      "alias": "BU",
      "name": "Union",
      "steps": "Select two or more compatible closed shapes, then BU.",
      "tip": "Immediate Boolean result. Overlapping regions combine; disconnected regions can remain separate."
    },
    {
      "group": "Boolean",
      "alias": "BS",
      "name": "Subtract",
      "steps": "Select the target as the primary shape, with other closed shapes as cutters; run BS.",
      "tip": "Selection order/primary object matters. Inspect immediately and Undo if the wrong region remains."
    },
    {
      "group": "Boolean",
      "alias": "BI",
      "name": "Intersect",
      "steps": "Select overlapping compatible closed shapes, then BI.",
      "tip": "Keeps only the common region; no overlap means no useful shared footprint."
    },
    {
      "group": "Position",
      "alias": "M",
      "name": "Move",
      "steps": "Select geometry, run M, then follow the base/displacement prompts.",
      "tip": "Move coordinates describe displacement in active-grid axes. Copy/arrays can preserve the original."
    },
    {
      "group": "Position",
      "alias": "O",
      "name": "Offset",
      "steps": "Select eligible geometry and set the offset distance. Run O and pick the side; the offset is created immediately.",
      "tip": "Inspect tight corners and curved sections after offset."
    },
    {
      "group": "Position",
      "alias": "RO",
      "name": "Rotate",
      "steps": "Select geometry, run RO, choose centre and reference points, or use Angle mode.",
      "tip": "Shift copies instead of transforming in place where supported."
    },
    {
      "group": "Position",
      "alias": "MI",
      "name": "Mirror",
      "steps": "Select geometry, run MI and define the mirror axis.",
      "tip": "Shift retains the original as a copy."
    },
    {
      "group": "Position",
      "alias": "AS",
      "name": "Align / Scale",
      "steps": "Select geometry and map two source points onto two target points.",
      "tip": "Choose Align only for 1:1 or Align + scale; review the preview before Enter."
    },
    {
      "group": "Grid",
      "alias": "GO",
      "name": "Grid origin",
      "steps": "Run GO and pick the new grid origin using snaps.",
      "tip": "Changes the grid datum, not the physical geometry."
    },
    {
      "group": "Grid",
      "alias": "GA",
      "name": "Grid align · 2 points",
      "steps": "Run GA and pick two points defining the positive grid X-axis.",
      "tip": "Typed coordinates follow the active grid axes."
    },
    {
      "group": "Grid",
      "alias": "GE",
      "name": "Grid from entity",
      "steps": "Run GE and pick a line or exact straight segment.",
      "tip": "Aligns the grid from existing geometry."
    },
    {
      "group": "Grid",
      "alias": "GL",
      "name": "Grid load / next",
      "steps": "Run GL to cycle to the next saved grid.",
      "tip": "Check the active grid before entering coordinates or nudging."
    },
    {
      "group": "Grid",
      "alias": "GS",
      "name": "Grid save",
      "steps": "Run GS to save the current grid.",
      "tip": "Useful for separate building wings or rotated setting-out axes."
    },
    {
      "group": "Layers",
      "alias": "LI",
      "name": "Layer isolate / restore",
      "steps": "Set the current drawing layer and run LI.",
      "tip": "Run LI again to restore the prior visibility state."
    },
    {
      "group": "Views",
      "alias": "Z",
      "name": "Zoom window",
      "steps": "Run Z and drag from one corner to the opposite corner of the zoom window; release to finish.",
      "tip": "Changes the view, not board scale or geometry size."
    },
    {
      "group": "Views",
      "alias": "ZE",
      "name": "Zoom extents",
      "steps": "Run ZE to fit drawing extents.",
      "tip": "Unexpected distant geometry can make the intended drawing look tiny."
    },
    {
      "group": "Views",
      "alias": "ZS",
      "name": "Save view",
      "steps": "Run ZS to save the current view.",
      "tip": "A saved view is navigation, not a backup of the drawing."
    },
    {
      "group": "Views",
      "alias": "ZP",
      "name": "Pan",
      "steps": "Run ZP and drag to navigate.",
      "tip": "The middle wheel zooms; on Surface use two fingers to pan and pinch."
    },
    {
      "group": "Annotation",
      "alias": "T",
      "name": "Text",
      "steps": "Run T and place editable text.",
      "tip": "Retain an editable copy before converting text to outlines."
    },
    {
      "group": "Annotation",
      "alias": "N",
      "name": "Note",
      "steps": "Run N and place a structured note.",
      "tip": "Use notes and leaders for review information, separate from model geometry."
    },
    {
      "group": "Annotation",
      "alias": "D",
      "name": "Dimension",
      "steps": "Press D and pick two measurement points. Use OSNAP to pick exact points and Ortho to measure along the active drawing axes. For a linear dimension, click to place the dimension line, type an offset, or press Enter for zero offset. Radius uses the centre and circumference points.",
      "tip": "Use a known dimension to check scale before and after DXF exchange."
    }
  ]
}
